Tern 1100 hardware fit record
Interactive 3D viewerFree · name and email required
Print this sheet or enter results in the CSV. Blank fields mean untested, not passed. Record the exact supplied part and any deviation before changing the CAD.
| Measurement / check | Observed value and result |
|---|---|
| Printer / nozzle / filament batch / material profile | |
| Coupon ID / measured mating dimensions / selected clearance | |
| Actual hardware SKU / supplied fasteners / mounting dimensions | |
| Screw grip / protrusion / thread engagement | |
| Strap, lead, horn and closed-cover clearances | |
| Completed dry mass / battery / selected configuration | |
| Measured CG behind leading edge / wing setting | |
| Joint preparation / adhesive / cure time / coupon test result | |
| Ballasted mass / waterline / minimum hatch freeboard / tilt recovery / leak result | |
| Control travel / direction / binding / retention | |
| Propeller removed: bus voltage / current / throttle cut / failsafe | |
| Measured propulsion / temperature / cooling (when mechanically qualified) | |
| Date / builder / changes / next action |
Open items for this model
- Actual hardware/linkages, seal durability, buoyancy/water handling, current/cooling, measured mass/CG and flight tests.