Relay 1200 P hardware fit record
Interactive 3D viewerFree · name and email required
Print this sheet or enter results in the CSV. Blank fields mean untested, not passed. Record the exact supplied part and any deviation before changing the CAD.
| Measurement / check | Observed value and result |
|---|---|
| Printer / nozzle / filament batch / material profile | |
| Coupon ID / measured mating dimensions / selected clearance | |
| Actual hardware SKU / supplied fasteners / mounting dimensions | |
| Screw grip / protrusion / thread engagement | |
| Retract flange-to-pivot / axle diameter / usable axle length / steering full sweep | |
| Strap, lead, horn and closed-cover clearances | |
| Completed dry mass / battery / selected configuration | |
| Measured CG behind leading edge / wing setting | |
| Joint preparation / adhesive / cure time / coupon test result | |
| Control travel / direction / binding / retention | |
| Propeller removed: bus voltage / current / throttle cut / failsafe | |
| Measured propulsion / temperature / cooling (when mechanically qualified) | |
| Date / builder / changes / next action |
Open items for this model
- Measured retract pivots, axles and steering sweep; actual rod-end and horn fitting; bond/load tests; loaded receiver bus, propulsion, mass/CG and flight tests.