Relay 1200 P current print order

Build guide · Parts list

Interactive 3D viewerDownload current R2 files ↓Free · name and email required

Print and fit prototype: physical printing, installed hardware and flight validation remain outstanding.

• Selected exact ESC, receiver, regulator and battery models and added their true case envelopes.
• Added two flat printed electronics decks with strap slots; no carbon tubes.
• Added a wiring plan, through-fastener guidance and actual retract/axle measuring sheet.

1. Included in ZIP: Relay-electronics-installation/Print-index.html
2. Included in ZIP: Relay-1200-v0.10-Full-Airframe-17-Plates/Print-index.html
3. Included in ZIP: Relay-1200-v0.10-Full-Airframe-17-Plates/Plate-order.csv

Read the fit-first section before large airframe plates. Print each installed item once; alternatives and test copies are not additional installed parts. The supplied files preserve required orientations. Do not scale a tight socket or let automatic orientation change a support-free layout.

Seventeen retained full-airframe plates plus one electronics-deck plate. The separate fitting coupons are trials, not additional airframe pieces.