Wisp 560 parts and equipment
Current build guide · Hardware fit record
Interactive 3D viewerFree · name and email required
Print and fit prototype: physical printing, installed hardware and flight validation remain outstanding.
Selected parts are for the documented prototype. Confirm exact version, supplied hardware and current availability before purchase. Manufacturer dimensions are not proof of installed fit. Quantities below are installed quantities; pack contents may include spares.
| Installed quantity | Item | Specification / fit condition | Source |
|---|---|---|---|
| 1 | Rubber motor loop | Only nonprinted flight component. Select size through measured fit/low-energy trials; no qualified winding limit is supplied. |
Workshop equipment
Caliper, gram scale, straightedge/square, suitable hand tools and the printer/material setup listed in the print guide. Powered models also need an appropriate battery charger, voltage/current measurement and radio setup tools. Use matched material bond coupons before structural adhesive assembly.
Installation details
See the current build guide’s interface table for hole patterns, fastener stacks, retention and channel assignments. Retained source cut lists and mechanical inventory remain necessary for the complete structure.