R3: Unpowered measuring package. The operating mechanical design is not complete: shaft-stack, gear-mesh, swash and boom dimensions are still required.
Rotor 235 hardware fit record
Interactive 3D viewerFree · name and email required
Print this sheet or enter results in the CSV. Blank fields mean untested, not passed. Record the exact supplied part and any deviation before changing the CAD.
| Measurement / check | Observed value and result |
|---|---|
| Printer / nozzle / filament batch / material profile | |
| Coupon ID / measured mating dimensions / selected clearance | |
| Shaft/collar/gear shoulder axial stack and bearing seat centers | |
| Motor boss/pattern/screw depth, pinion module/bore and gear mesh | |
| Swash guide location/travel; horn-ball offsets and link centers | |
| Actual tail boom section/OD/length/indexing and tail-motor pattern | |
| Strap, lead, horn and closed-cover clearances | |
| Completed dry mass / battery / selected configuration | |
| Measured CG behind leading edge / wing setting | |
| Joint preparation / adhesive / cure time / coupon test result | |
| Control travel / direction / binding / retention | |
| Propeller removed: bus voltage / current / throttle cut / failsafe | |
| Measured propulsion / temperature / cooling (when mechanically qualified) | |
| Date / builder / changes / next action |
Open items for this model
- Measured mechanics and completed load-bearing mount geometry; receiver/BEC/ESC compatibility and current; vibration, retention, control setup and flight qualification.